YT-82507
PORTABLE BATTERY SPOT WELDER 500A
![](https://pim.toya.pl/piktogramy/ELECTRIC/image-thumb__322319__Sklep_pikto/1-10_POWER.png)
![](https://pim.toya.pl/piktogramy/ELECTRIC/image-thumb__322300__Sklep_pikto/500_A.png)
![](https://pim.toya.pl/piktogramy/ELECTRIC/image-thumb__326053__Sklep_pikto/FeNi_max_0%2C2mm.png)
![](https://pim.toya.pl/piktogramy/ELECTRIC/image-thumb__326054__Sklep_pikto/99pc_Ni_max_0%2C15mm.png)
![](https://pim.toya.pl/piktogramy/PICTURE_PARAMETER/image-thumb__77426__Sklep_pikto/USB_5V_2A.png)
![](https://pim.toya.pl/piktogramy/ELECTRIC/image-thumb__322318__Sklep_pikto/Li-Po_6300mAh.png)
Portable spot welder with powerbank function for permanently bonding 18650 and similar cells using nickel and nickel strip. LCD display with simple, intuitive menus. Ten power levels. Two lithium-polymer cells connected in parallel with a maximum instantaneous discharge current of up to 90 C. 40 cm silicone-insulated copper wires of approximately 10mm2 with replaceable copper terminations.
The device gives a maximum welding current of ~500 A. This is the average real current value measured over a 100 ms period. Some manufacturers quote the current parameters of the mosfets or the peak current value instead of the real welding current. From a technical data point of view, this is true, but in practice it often becomes impossible to achieve a proper weld with 0.15 mm nickel-plated tape. YATO's portable spot-welding machine makes it possible to carry out correct welds using 8 mm wide, 0.20 mm thick nickel-plated tape and 8 mm wide, 0.15 mm thick nickel-plated tape.
The sealer can be charged with any phone charger using a cable with a USB-C connector. The USB-A socket will allow devices with a demand of 5 V and a maximum current of 2 A to be powered.
- max. welding current 500 A
- input current: 1-1.5 A
- output current: 2 A
- input voltage: 5V
- output voltage: 5V
- Operating temperature range: 0~35 ˚C
- battery type: Li-Po
- battery voltage: 4.2 V
- battery capacity: 6300 mAh
- dimensions: 148x86x30 mm
- display type: LCD
- weight: 0.32 kg
kit contents:
- welding cable 2 pcs
- welding pin 4 pcs
- charging cable