Multifunctional sharpener 150w, 5500 rpm, for sharpening drills 3-13mm

Multifunctional sharpener 150W for sharpening steel drills 3mm -13mm, knives, axe scissors and cleavers.

Purpose/application:

• sharpening of drills intended for drilling in metal or universal drills
• sharpening of knives
• sharpening of scissors
• sharpening of axes and cleavers

provided that all the aforementioned products are made of steel.

Technical data:

• network voltage: 230 V
• network frequency: 50 Hz
• rated power: 150 W
• rated speed: 5500 min-1
• drill diameter: 3 mm -13 mm
• drill tip angle: 118 degrees
• insulation class: II
• protection rating: IP20
• noise level:

- sound pressure LpA ± KpA - 81.56 ± 3 dB (A)
- sound power LwA ± KwA - 94.56 ± 3 dB (A)

• Weight: 1.62 kg

How to use

Before starting work, place the sharpener on a level, flat and hard surface. Make sure that all the feet of the tool rest on the ground. Use the sharpener only in a dry area, without the possibility of access of bystanders, especially children.

Sharpening of axes, knives, scissors:

• sharpening of axes knives and scissors should be carried out with protective gloves, protecting against cuts
• select the slot intended for sharpening a particular type of blade
• switch on the sharpener and wait until the nominal speed is reached
.
• insert the blade into the appropriate slot and then pull it in the direction opposite to the direction of rotation of the grinding plate, marked on the sharpener housing
• while pulling, the blade should be pressed against the grinding plate with a slight force. Repeat the operation several times