Portable battery power station with a capacity of 917 Wh with UPS function. It can handle eleven devices at once. Built-in bidirectional AC converter with pure sine wave with a rated power of 1200 W (peak up to 2400 W) will work as an emergency power source for, among others, a pump and central heating boiler controller, router, desktop computer, most power tools, and many other devices. Six USB ports, including two USB-A in Q.C technology max 18 W, two USB-C in PD 60 W and PD100 W technology, will power and recharge your smartphone, tablet, or laptop multiple times. The 12 V socket will successfully power a camping fridge or dedicated lighting. Two 12 V output jack sockets can be used, for example, to maintain voltage in the car while charging the battery.

• UPS function ensures continuity of operation of connected devices in case of power failure, will handle devices with a total rated power of 500 W. In case of power outage, the module will switch from mains power to battery power in a time not exceeding 20 milliseconds (unnoticeable to devices)
• Energy reserve at full charge and constant consumption of 500 W is sufficient for approximately two hours of continuous operation
• Built-in energy bank with 98 Li-Ion high discharge rate cells in NMC/INR technology in 18650 housing with a rated voltage of 3.6 V and a capacity of 2600 mAh (total 254800 mAh)
• Capacity does not drop below 80% of the initial value even after 500 full discharge cycles
• Cells arranged in a sturdy basket construction ensuring free access of air to each cell, significantly improving cooling efficiency
• Advanced BMS system, which monitors all current parameters and cell temperature in real time, ensuring safety of the charging and discharging process
• BMS has protections against overcurrent, short circuit, excessive discharge, overcharge, overvoltage, and overheating
• Cell balancing system extends the lifespan of the entire pack
• Special USB-C port to wake up the cell pack - if we leave the station discharged to 0% for a long time and the device does not respond to the connected charger, we can wake up the cells and restore the station and BMS to operation using a 5 V, 2 A power supply
• Charging the station is possible in three ways: fast charging directly from the mains socket with a bidirectional converter, using a cable for the car cigarette lighter socket, or from external photovoltaic panels
• As one of the few on the market, it has a built-in MPPT charging regulator, allowing full utilization of the energy supplied by the panels without cutting off excess voltage
• Produced according to automotive standards

Additional information:

• Total Harmonic Distortion (THD) at full load: ≤3%
• Operating time at rated device load (1200 W): 40 min
• Charging time from the mains socket: ~1.4 h
• Charging time from the car cigarette lighter socket: ~6-9 h
• Charging time from solar panels: ~6 h
• Continuous power from AC sockets 230 V: 1200 W (2400 W peak)
• Cigarette lighter socket: 12 V/10 A
• 2 jack sockets: 12 V/10 A
• 2 USB-A sockets: 5 V/3.1 A
• 2 USB-A sockets: 18 W in Q.C. 3.0 technology
• 2 USB-C sockets: 60 W and 100 W in PD technology
• BMS protection: overcurrent, short circuit, excessive discharge, overcharge, overvoltage, overheating
• Inverter protection: against too low or too high voltage, short circuit
• LED light with 3 modes, including SOS, with a power of 2 W
• Dimensions: 387 x 285 x 219 mm
• Weight: 12 kg
• Set contents: station, power cable, cable for charging the product from a 12 V DC electrical installation, cable for charging the product from an external solar panel

Usage warnings: